FEATURES

In-Tank Light and Controls
 

• 2 light fittings for creating a gentle glow inside the tank are controlled by a switch inside the tank within easy reach of the floater’s hand.  There is remote dimmer control over the light.
• The main purpose of an internal light is to give the floater - particularly a first-time or novice floater - an added degree of control, helping the individual to acclimatise to the tank environment at the start of a float session and re-orientate at the end of a float session.
• We wish to point out that a similar effect can be achieved by leaving the Apollo^tm ELV sliding door slightly open during a float session; this, however, produces a slight drop in air temperature inside the tank.

Volume Control
 

• An in-tank volume control gives the floater control over sound levels.
• Important feature to counteract different audio levels amongst tapes as well as individual hearing variation, especially if a pillow is used.

EVA Anti-vibration Pad
 

• Some float tank locations are located near main roads or other sources of noise and vibration.
• The Anti-vibration pad helps eliminate these potential distractions and provides an ideal footing for the Apollo^tm ELV.

Custom Colour Finishes
 

• We offer a complete custom finish service to private, professional or commercial tank owners.
• The Apollo^tm ELV float tank can be custom finished to match any club or team colours, room decor or other special requirement, including "badging" the tank with your company, club or personal logo.

Intelligent Filtration
 

• The step unit "senses" the presence of a floater entering or leaving the tank and automatically controls the filtration cycle before and after a float session.
• Ideal for commercial use.

Attendant Call Button/Alarm
 

• This feature allows for a quick response to any potential problems which a client may experience (Rare). Particularly useful if clients include disabled or injured persons.
• An air switch with in-tank LED operates a high frequency alarm on the remote control unit.
• An Alarm Acknowledge button is located on the remote control unit to temporarily disengage the Alarm.  Ideal for commercial use.

Volume Control Bypass
 

• Important addition if the Volume Control is featured.
• The operator presses a button which enables sound to be sent to the tank at the end of a float even if the floater has turned the volume off. Ideal for commercial use.

Moisture Sensor
 

• Senses if there is enough water or solution to cover the bottom of the float tank inner bath.
• When dry the bath will not be heated until the sensor is covered by water or solution.  A safety feature.

Over-Temperature Heater Cut-Out Switch
 

• If the solution temperature reaches approximately 36.0º then the heater will switch off until it is manually reset.

Video Package
 

• A transparent "window" is built into the tank's roof.
• A video cable is provided.  The remote control unit has additional circuitry for operation of the video monitor.
• An in-tank air switch gives the client control over the monitor.
• The monitor is supported with a stylish surround and cover.
• Enables complete light-proof set-up of monitor for audio-visual application.
• A light seal cover is used to seal the tank from light when the monitor is not in use.

Audio-Visual Package
 

• This package comprises a good quality CD/DUAL CASSETTE MINI-SYSTEM, TV MONITOR and VIDEO PLAYBACK MULTI-SYSTEM
• Enables timer control over music and microphone client contact.